<tr id="uyiom"><xmp id="uyiom">
<tr id="uyiom"><xmp id="uyiom">
<rt id="uyiom"></rt>
<tr id="uyiom"><xmp id="uyiom">
<rt id="uyiom"><optgroup id="uyiom"></optgroup></rt>
新聞動態
 高溫電阻爐操作應該注意什么?

在操作高溫電阻爐時,應留意以下幾點:
When operating the high temperature resistance furnace, pay attention to the following points:
1.在剛開始運用的時分,操作員必需先查看一下高溫電阻爐內是不是有鐵屑等殘留物品,如果發現有的話,就要清洗,以防止當鐵屑墜落的時分發生短路表象。
1. At the beginning of operation, the operator must first check whether there are iron filings and other residues in the high-temperature resistance furnace. If any, it shall be cleaned to prevent short circuit when iron filings fall.
2.高溫電阻爐在工作時,要留意放入爐里的工件的承載量不能大于爐底板。
2. When the high-temperature resistance furnace is working, it should be noted that the bearing capacity of the workpiece put into the furnace should not be greater than the furnace bottom plate.
3.為了確保工件能有用的在爐內焚燒,在操作進程中不要隨意打開門,放入爐內的工件和插入爐內的熱電偶應不相碰。
3. In order to ensure that the workpiece can be burned in the furnace effectively, do not open the door at will during the operation process, and the workpiece put into the furnace and the thermocouple inserted into the furnace shall not collide.
4.工件拿出來的時分則要詳盡,以防止溫渡過高燙傷旁人,應跟著工件的改變請求,守時升降溫。
4. The time when the workpiece is taken out shall be detailed to prevent others from being scalded by excessive temperature. The temperature shall be raised and lowered on time according to the change request of the workpiece.
5.要如期的給高溫電阻爐查驗修理。
5. Check and repair the high temperature resistance furnace as scheduled.
高溫電阻爐還需求留意的細節還有很多,需求有專業的操作人員構成管理和運用準則,定時專人的保護養護和查看,運用時呈現的異常表象和不正確操作要及時發現和上報,留意不正常的數據改變,養成杰出的電爐運用習氣。高溫電阻爐首要用于各工礦公司、大專院校、科研單元、小型鋼件淬火、退火、回火時加熱用。定碳爐公用于鋼鐵廠、鑄鐵廠、化驗室作碳硫闡發之用。因而高溫爐配有溫度節制器,操作測溫用熱電偶指示調理、自動節約高溫爐溫度。溫控儀分為指針式和數字式兩種?,F如今的高溫電阻爐是對老產品的改革和進級換代產品,配有國內特別自動化儀表,控溫儀及呼應的熱電偶,使電爐的溫度節制切確度更高,更自動化。
High temperature resistance furnace also needs to pay attention to many details. Professional operators are required to form management and application criteria, and special personnel are required to protect, maintain and check regularly. Abnormal appearances and incorrect operations during application should be found and reported in time, pay attention to abnormal data changes, and develop excellent electric furnace application habits. High temperature resistance furnace is mainly used for heating during quenching, annealing and tempering of industrial and mining companies, colleges and universities, scientific research units and small steel parts. Carbon fixing furnace is commonly used for carbon and sulfur analysis in iron and steel plants, cast iron plants and laboratories. Therefore, the high-temperature furnace is equipped with a temperature controller, which can operate the thermocouple to indicate and regulate the temperature, and automatically save the temperature of the high-temperature furnace. The temperature controller is divided into pointer type and digital type. Today's high-temperature resistance furnace is a reform and upgrading product of old products. It is equipped with domestic special automation instruments, temperature controllers and corresponding thermocouples to make the temperature control accuracy of electric furnace higher and more automatic.

 
濟南金岳電爐制造有限公司 版權所有(C)2014   網絡支持   股票代碼: 002095 著作權聲明 網站管理 魯ICP備14033186號-1
无翼乌之无遮全彩工口之老师